Sonance VP66R SST/SUR – Stereo In-Ceiling / In-Wall / Surround Speaker Each
- Reviews (0)
The Sonance VP66R has incorporated the combination of Single Stereo Technology and Surround in one speaker. Uses a switch on the crossover cover to select between Single Stereo Technology and Surround. The VP62R SST/SUR has a power handling of up to 140W with a frequency response of 43Hz – 20kHz ±3dB
Designed using state-of-the-art computer modeling software to vastly improve magnetic field and suspension linearity for consistent sonic performance at any SPL for best-in-class performance.
Sonance Visual Performance Series was developed using cutting-edge design and computer modeling software to deliver best-in-class performance in every category and at every price point.
Sonance Visual Performance Series speaker drivers are constructed from state-of-the-art materials that are extremely rigid and lightweight. This enables the speaker to reproduce music accurately and with precise detail.
-Surround speakers for home theater applications
-The perfect surround sound partner for Visual Performance Series LCR speakers or Sonance Soundbars
-Various sizes and shapes to match the aesthetic of the room
-Two performance levels to accommodate any ear or budget
-Same exceptional Visual Performance Series sound quality
Latest high-tech driver and tweeter material technology
• Improved low frequency performance
• Improved driver cone materials
• Low diffraction driver design
The chambered tweeter design does the following
• Lowers the resonance frequency of the tweeter
• Allows for a lower crossover frequency to the woofer
• Reduces the back pressure on the tweeter dome
• Reduces the distortion of the tweeter near the crossover frequency
Easier to install
• Easier to access Roto-Lock® screws
• Removed metal hang tabs
• One-piece paintable grille with peel and stick scrim cloth for easier painting
• Two piece toggle feet allows installation with double dry wall and thicker ceiling and wall materials
SST / SUR Setup and Connection
Use as a Surround (SUR)
Connect the + and – wires from your amplifier or receiver to either pair of terminals on the VP SST/SUR speaker. Remove the red sticker and set the switch to SUR. Use as a Single Stereo Technology (SST). Connect the + and – wires from the left channel to one pair of terminals and the + and – wires from the right channel to the other
pair of terminals. The switch is preset in the SST mode and should not be changed.
NOTE: WHEN THE SWITCH IS PLACED IN THE SUR MODE THE TWO PAIRS OF BINDING POSTS ARE CONNECTED! DAMAGE CAN OCCUR TO YOUR AMPLIFIER IF YOU CONNECT TWO DIFFERENT AMPLIFIER CHANNELS TO THE SPEAKER WITH THE SWITCH SET IN SUR MODE.
-Tweeter: Two 25mm powder coated aluminum domes, Ferrofluid-cooled, in acoustic back chamber
-Woofer: 165mm Kevlar / Nomex laminated cone with a rubber surround, pivoting, dual voice coil
-Frequency Response: 43Hz – 20kHz ±3dB
-Impedance: 8 ohms nominal; 6 ohms minimum
-Power Handling: 5 watts minimum; 140 watts maximum
-Sensitivity: 90dB SPL (2.83V/1 meter)
-Dimensions: 248mm x 121mm
-Dimensions with Square Grill: 251mm x 251mm
-Shipping Weight: 2.3kg each