Experience all the scale and power of your favourite music without letting your loudspeaker dominate your room. The Q Acoustics 5020 standmounting speaker will put your right in the heart of the music without putting itself at the heart of your space.

Mid/bass driver design
At the heart of the ground-up mid/bass driver design is the C3 Continuous Curved Cone™. The cone’s geometry requires good motor strength for optimal performance. Substantial magnets are coupled to large voice coils to increase motor strength – the result is a 50% increase in power handling and control over a comparable driver with 25.4 mm voice coil. The result is an improvement in the dynamic range of the speaker, especially in the bass region. 

High-frequency driver design
Based on the tweeter design principle found in the newest Concept series, the high frequency driver unit is hermetically sealed and mechanically isolated (floating) from the baffle to prevent internal pressure modulations from within the cabinet and adjacent mid/bass driver. The inner chamber is also carefully vented for lower distortion, with a lower crossover point for seamless integration through the crossover region.

C3 Continuous Curved Cone™
A genuine advancement in elements of mid/bass driver design, the C3 Continuous Curved Cone™ profile is the result of extensive research and expert engineering to combine the bass performance benefits of a traditional straight conic cone with the high/mid-range frequency control of a flared cone.


Bass unit1 x 125 mm (5.0 in)
Treble unit1 x 25 mm (1.0 in)
Frequency response(-6dB) 53 Hz – 30 kHz
Nominal impedance 6 Ω
Minimum impedance 3.3 Ω
Sensitivity (2.83V @ 1kHz)87.9 dB/w/m
Recommended amplifier power 25-100 W
Crossover frequency 2.5 kHz
Effective volume 6.8 L
Dimensions (per loudspeaker / HxWxD) 284 x 180 x 293 mm 
Weight (per loudspeaker) 7.0 kg 

Please view our full catalogue of products

Please view our online shop of products

Additional information


Black, Rosewood, White, Oak